Queensland 2014 hourly PM10 data

Period of reporting: 1 January to 31 December 2014
Monitoring sites: Brisbane CBD, Cannon Hill, Flinders View, Lytton, Mountain Creek, Pinkenba, Rocklea, South Brisbane, Springwood, Woolloongabba, Wynnum North, Wynnum West (South East Queensland); Jondaryan (Jondaryan); Auckland Point, Boat Creek, Boyne Island, Clinton, South Gladstone, Targinie (Gladstone region); West Mackay (Mackay); Moranbah (Moranbah); Ayr (Ayr); Pimlico, Townsville Coast Guard (Townsville); The Gap (Mount Isa)
Measurement units: micrograms per cubic metre (ug/m^3)
Measurement technique (Brisbane CBD, Flinders View, Mountain Creek, Pinkenba, Springwood, Wynnum North - to 28 February, Auckland Point, West Mackay - to 17 November, Moranbah, Pimlico, Townsville Coast Guard, The Gap): Tapered Element Oscillating Balance (TEOM) Model 1400AB operated in accordance with AS 3580.9.8

• Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter.
• Instrument output values are adjusted in accordance with US EPA equivalence designation method EQPM-1090-079 requirements (scaled by 1.03, offset by +3.0).
• After adjustment, negative hourly PM10 concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3.

Measurement technique (West Mackay - from 28 November, Ayr): Tapered Element Oscillating Balance (TEOM) Model 1405 operated in accordance with AS/NZS 3580.9.13 (excluding FDMS requirements)

• Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter.
• Reported concentrations are uncorrected instrument output values.
• Negative hourly PM10 concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3.

Measurement technique (Lytton, Wynnum North - from 1 March, Wynnum West): Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-D operated in accordance with AS/NZS 3580.9.13 (excluding FDMS requirements)

• Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter.
• Reported concentrations are uncorrected instrument output values.
• Negative hourly PM10 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported.

Measurement technique (Cannon Hill, Rocklea, South Brisbane, Woolloongabba, Jondaryan, Boat Creek, Boyne Island, Clinton, South Gladstone, Targinie): Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13

• The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter.
• Reported concentrations are uncorrected instrument output values.
• The reported PM10 concentrations are calculated from running 1-hour average concentrations updated at six minute intervals.
• Negative hourly PM10 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported.